Full-size pickup with verified US identity

This white 2018 Ford F-150 combines a four-door SuperCrew cabin, five-seat practicality and a useful pickup bed. The Ford manufacturer label and UAE vehicle card both show VIN 1FTEW1CBXJKE96423. The card records model year 2018, American origin and five passengers, while the instrument display reads 181,083.6 kilometres. The official US VIN decoder identifies a 2018 F-150 pickup with a 3.3-litre gasoline V6 and 4x2 drivetrain. These matching records provide a clear starting point for a careful ownership and condition review.

White exterior and work-ready format

The exterior uses a straightforward white finish with a chrome grille and bumpers, black mirrors, a full-size cargo bed and rear tow-hitch receiver. Photographs show the front and rear clearly, and the four full doors confirm the spacious SuperCrew body style. Inspect the paint outdoors in direct light and shade, compare reflections across neighbouring panels and check the bonnet, tailgate, bed sides, cab corners, lamps, glass, mirrors, handles and seals. Examine the bed floor and mounting points for signs of previous load use. A calibrated paint-depth survey and lift inspection should be used to establish repair history, frame alignment, corrosion and the condition of underbody components.

Five-seat grey cloth cabin

The cabin has grey cloth seating, a front centre section that can provide flexible space, a rear bench and practical storage throughout. Visible equipment includes steering-wheel controls, a central information and audio display, air-conditioning controls, power windows and mirrors, and a column-mounted automatic selector. Test every seat adjustment, head restraint, belt and child-seat anchor. Operate all doors, windows, mirrors, locks, lamps, wipers and washers. Run the air conditioning long enough to assess cooling under UAE conditions, then test the display, audio, reversing camera, charging points and every fitted switch without assuming equipment that is not shown.

3.3-litre V6 and six-speed automatic

Ford's official 2018 technical information specifies the naturally aspirated 3.3-litre Ti-VCT V6 with port and direct injection, 290 horsepower, 265 lb-ft of torque and a six-speed SelectShift automatic transmission. The VIN decoder confirms the 3.3-litre engine and rear-wheel-drive 4x2 layout for this truck. Begin the inspection with a completely cold engine, listen during start-up and observe idle quality, exhaust behaviour, fluid condition and dashboard warnings. Confirm prompt engagement of reverse and drive, smooth shifts at light and moderate throttle and stable behaviour when slowing. A Ford-capable workshop should scan all modules and inspect the cooling system, ignition parts, mounts, transmission, propeller shaft, differential and exhaust.

Documented 181,083.6-kilometre reading

The instrument photograph directly displays 181,083.6 kilometres, so the database figure is rounded to 181,084 kilometres. Compare this reading with UAE inspection history, registration records, dated service invoices and workshop entries. A reliable history should show a consistent distance sequence and identify the work completed at each visit. Review engine-oil and filter changes, coolant, transmission service, brake fluid, spark plugs, battery, tyres, brakes and suspension maintenance. Ask for both keys and available manuals, and check that the VIN and dates match across every document.

Road-test and load-related checks

Plan a safe route that includes parking, tight turns, moderate acceleration, steady cruising and controlled braking. Confirm that the steering remains centred, the truck tracks straight and the brake pedal feels firm without vibration. Listen over uneven surfaces for noises from suspension joints, wheel bearings, body mounts, bed fittings or interior trim. Observe coolant temperature, oil pressure indications and every warning lamp. Because a pickup may have carried loads, inspect rear springs, dampers, axle seals, driveshaft joints, differential, hitch area, tyres and wheel alignment carefully. Request a written workshop report separating immediate repairs from future routine maintenance.

VIN, specification and registration verification

The Ford label shows manufacture in July 2018, VIN 1FTEW1CBXJKE96423, 2,849 kg GVWR and 245/70R17 tyres. The UAE card repeats the chassis number and records 2018, American origin, five passengers and a truck body. NHTSA decodes the VIN cleanly as a Ford F-150 with a 3.3-litre gasoline V6 and 4x2 drive. Compare the physical chassis stamp, label and card at the viewing, check title and registration status, and confirm that all identification areas are intact. Review the exact axle and equipment codes before deciding how the truck suits towing or payload needs.

Arrange a complete daylight inspection

This F-150 offers a roomy SuperCrew cabin, verified 3.3-litre V6 identity and practical rear-wheel-drive pickup layout. Contact us to confirm availability and arrange a daylight viewing in Dubai International City. Allow enough time for a cold start, full equipment demonstration, document review, extended road test and independent workshop inspection. Base the final decision on the verified VIN, consistent 181,084-kilometre history, frame and body assessment, current mechanical condition, tyre and brake state, and suitability for your passenger, cargo and everyday driving requirements.